sales@ivojo.co.uk
01348 840080
CYP PUV-662-4K22
6×8 HDMI 2.0 / IR / PoH / Ethernet to HDBaseT Matrix Switch with Audio Matrixing
6 × HDMI 2.0 inputs; 6 × HDBaseT 5-Play, 2 × HDMI 2.0 outputs;
Availability: In stock
CYP PUV-662-4K22
The CYP PUV-662-4K22 HDMI/HDBaseT Matrix supports the transmission of video (resolutions up to 4K2K@60Hz, HDCP 2.2, HDMI2.0) and multi-channel digital audio from 6 HDMI sources to 6 HDBaseT outputs and 2 independent HDMI2.0 outputs. The HDBaseT outputs allow transmission via a single CAT5e/6/7 cable up to 100m, whilst the independent HDMI outputs support cable lengths of up to 10m. This matrix supports high resolution digital audio formats such as LPCM 7.1CH,Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio as well as 3D video content.
The PUV-662-4K22 matrix incorporates an independent audio matrix with 8 audio outputs and 4 audio inputs. These outputs and inputs can be used for de-embedding HDMI audio to feed the audio outputs and embedding this audio to the HDBaseT and HDMI outputs. In addition, volume, mute, treble, bass and audio lip-sync correction control are available on all direct audio outputs. Optical Audio Return (OAR) Technology allows the optical input on the PUV-1530RX receiver to be routed back to the audio matrix.
LAN connectivity provides a 100BaseT network for smart TV's or games consoles in every zone. The matrix has a built-in pattern generator which can be used to verify the video signal on any of its 8 output ports. The Power over HDBaseT (PoH) function provides power to compatible receivers.
Control is via manual selection buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers for all the major control systems.
The PUV-662-4K22 is designed to be used with PUV-1530RX or PUV-1510RX receivers that can utilise the PoH capabilities of the matrix.
CYP PUV-662-4K22 Key Features
- HDMI 2.0, HDCP1.4 and HDCP2.2 compliant
- Routes six HDMI sources to eight displays using six HDBaseT outputs and two independent HDMI outputs
- HDBaseT 5-Play™ convergence: High-Definition video and audio, 100BaseT Ethernet, PoC (Power over Cable) and control (Bi-Directional IR)
- Supported HDBaseT resolutions: VGA~WUXGA, 480i~1080p, 4K UHD@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2), 4K UHD@ 60Hz (YUV 4:2:0), 4K/2K@24/25/30Hz (RGB 4:4:4 & YUV 4:2:2) and 4K/2K@ 60Hz (YUV 4:2:0) dependent upon the output display's EDID settings
- Supports resolutions up to 4K@60 (RGB 4:4:4) on HDMI output ports
- Supports automatic 4K@60 RGB 4:4:4 to YUV 4:2:0 conversion for HDBaseT outputs
- 4K/2K & 4K UHD signals can be transmitted up to 70m via CAT5e/6 and 100m via CAT6a/7
- Supports pass-through of HD audio formats: LPCM 2/5.1/7.1CH, Dolby Digital 2/5.1CH, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos and DTS-HD Master Audio
- Supports audio matrix functionality enabling full audio management of the system including HDBaseT audio zone selection, and fully independent audio only zones
- Supports Digital to Analogue Conversion (DAC) and Analogue to Digital Conversion (ADC) for audio integration
- Supports Volume, Mute, Treble, Bass, and Audio delay for lip-sync on direct audio outputs
- Optical Audio Return (OAR)
- Advanced internal and external EDID management with 4 sets of configurable EDID settings
- Internal test pattern generation for self-testing and sink device testing. (Internal test patterns up to and including 4K signals)
- Supports HDCP repeating and CEC functions
- Control is via RS-232, remote control, on-panel control and IP Control (Telnet & Web GUI)
- 2U rack mounted design
CYP PUV-662-4K22 Downloads
CYP PUV-662-4K22 Specifications
Connectivity |
|
| Inputs | 6 × HDMI Uncompressed AV and Data |
| 4 × RCA Analogue Stereo (L/R) | |
| 1 × Toslink Optical DTS / Dolby Digital / 2 Channel LPCM | |
| 1 × RCA Coaxial DTS / Dolby Digital / 2 Channel LPCM | |
| 7 × 3.5mm Stereo mini-jack Infra Red Receiver | |
| 1 × 9pin D-sub RS-232 Data | |
| 1 × RJ45 IP Control / LAN Serving | |
| 1 × USB Type A Service Port Propriety Data | |
| Outputs | 2 × HDMI HDMI Uncompressed AV and Data |
| 6 × RJ45 HDBaseT HDMI & Propriety Data | |
| 12 × RCA Zone - Analogue Stereo (L/R) | |
| 4 × RCA Extended - Analogue Stereo (L/R) | |
| 7 × 3.5mm Stereo mini-jack Infra Red Emitter | |
Mechanical |
|
| Poe PSU | PoC |
| PSU | 24V/6.25A |
| Dimensions | 316mm × 438mm × 96mm |
| Net Weight | 6000g |
| Gross Weight | 8000g |
CYP PUV-662-4K22 Usage Diagram
CYP PUV-662-4K22 Compatible Products
| Product Code | Description | Price | Inc. VAT |
| CYP PUV-1510RX | 1:1 HDBaseT 4K HDMI / HDCP2.2 / PoH / LAN / IR / RS-232 Receiver (Max 70m @ 4K using CAT6a/7 cable) | £179 | £214.80 |
| CYP PUV-1510RXWP | 1:1 HDBaseT HDMI / LAN / IR / RS-232 / PoH Twisted Pair Receiver (1 × HDMI input; 1 × HDBaseT output; Max 100m at 1080p or 70m at 4K, Max bandwidth 10.2Gbps) | £283 | £339.60 |
| CYP PUV-1530RX | 1:1 HDBaseT 4K HDMI / HDCP2.2 / PoH / LAN / OAR / IR / RS-232 Slimline Receiver (Max 70m @ 4K using CAT6a/7 cable) | £222 | £266.40 |