CYP PUV-1082PL-4K22N

The CYP PUV-1082PL-4K22N HDMI/HDBaseT Matrix supports the transmission of video (resolutions up to 4K2K@60Hz, HDCP 2.2, HDMI2.0) and multi-channel digital audio from 10 HDMI sources to 8 HDBaseT outputs and 2 independent HDMI2.0 outputs. HDBaseT outputs allow transmission via a single CAT5e/6/7 cable up to 60m, whilst the independent HDMI outputs support cable lengths of up to 10m. This matrix supports high resolution digital audio formats such as LPCM 7.1CH, Dolby TrueHD, Dolby Digital Plus, Dolby Atmos and DTS-HD Master Audio as well as 3D video content.

This revised version of our popular 10×10 matrix now includes 6G input auto conversion, pre-gain volume control on all audio inputs, simple automation via CEC sending, and an advanced pattern generator.

This matrix incorporates an independent audio matrix with 14 audio outputs and 10 audio inputs. These outputs and inputs can also be used for de-embedding HDMI audio to the audio outputs and embedding audio to the HDBaseT and HDMI outputs. The audio CAT connections, along with compatible bi-directional audio modules (PU-305BD-TX & PU-305BD-RX & PU-305BDA-RX) allow integration with remote sources and remote audio zones. In addition, volume, mute, treble, bass and audio lip-sink correction controls are available on all direct audio outputs. Optical Audio Return (OAR) Technology allows the optical input on the PUV-1230PLRX receiver to be routed back to the audio matrix. Video signals beyond the bandwidth of HDBaseT will be automatically converted to ensure a picture is always transmitted to the HDBaseT receiver.

HDMI inputs and HDBaseT / HDMI outputs can be configured to send command-based HEX CEC messaging. HDBaseT outputs can be configured to downscale either via Auto EDID read or permanently ON or OFF. The matrix has a built-in pattern generator which can be used to verify the video signal on any of its 10 output ports. The Power over HDBaseT (PoH) function provides power to compatible receivers.

Control is via manual selection buttons, IR, RS-232, Telnet or Web GUI. CYP provide control drivers for all the major control systems. The PUV-1082PL-4K22N is designed to be used with PUV-1230PLRX or PUV-1210PLRX receivers that can utilise the PoH capabilities of the matrix.