Emailsales@ivojo.co.uk Telephone01348 840080
Shopping Cart Shopping Cart

WyreStorm EX-70-H2

1:1 4K HDMI 2.0 / IR / RS-232 / PoH over HDBaseT Extender Kit

Max. 100m at 4K with Cat6a/7 cable;9.2Gbps

WyreStorm EX-70-H2 1:1 4K HDMI 2.0 / IR / RS-232 / PoH over HDBaseT Extender Kit product image. Click to enlarge.
WyreStorm EX-70-H2 1:1 4K HDMI 2.0 / IR / RS-232 / PoH over HDBaseT Extender Kit connectivity (terminals) product image WyreStorm EX-70-H2 1:1 4K HDMI 2.0 / IR / RS-232 / PoH over HDBaseT Extender Kit Front View product image WyreStorm EX-70-H2 1:1 4K HDMI 2.0 / IR / RS-232 / PoH over HDBaseT Extender Kit connectivity (terminals) product image
£492 (£590.40 inc. VAT)
Availability: In stock

WyreStorm EX-70-H2

Part of the latest generation of WyreStorm 4K extenders for the latest generation of 4K HDR content, the EX-35-H2 features dynamic compression technology to enable high frame rate HDR-10 and HLG content to be transmitted over standard 10Gbps HDBaseT, both visually losslessly and without latency.

HDMI 2.0 MAXED OUT

Knowing the speed at which technology moves, at WyreStorm we’re always looking ahead. That’s why we’ve implemented our VLC chipset (Visualy Lossless Compression) into this model meaning it’s ready for the next shift in content technology: 4K 60Hz 4:4:4 HDR.

HDCP 2.2 COMPLIANT

The latest 4K UHD content arriving via satellite, cable, disc or stream is all heavily encrypted. Being part of the H2 product family, the EX-70-H2 supports the multi-point distribution of this content over HDBaseT™.

SIGNAL RE-CLOCKING

Installers shouldn’t experience problems because of source equipment they have no control over. That’s why all extenders in the WyreStorm H2 family automatically “re-clock” the source signal, overcoming clock-stretching issues found in certain source devices.

FLEXIBLE INSTALL OPTIONS WITH 2-WAY PoE

No 2 installs are the same; that’s why we’ve enabled all of the H2 extender line up to be powered from either the TX or RX, meaning maximum flexibility on-site without hunting for a mains outlet.


See also: WyreStorm TX-35-IW.

WyreStorm EX-70-H2 Key Features

  • 4K UltraHD extender set capable of transmitting AV content over medium distances using single cable Cat6 cable
  • HDBaseT™ Class B transmission of 4K HDR up to 35m/115ft and 1080p @60Hz 36bit up to 70m/230ft
  • Full UHD 4K transmission supporting HDMI 2.0 video standards
  • Supports all high definition resolutions including 4K UHD @30hz 4:4:4 24bit — 4K HDR @24Hz 4:2:0 10bit (BT.2020) – see specifications for details
  • Revised chipset increases compatibility with new 4K UHD source devices
  • Transmits discreet wide-band bidirectional IR/RS-232 control signals together with HDMI over a single Cat5e/6 cable
  • Low profile chassis of 15mm for easier, more convenient installations behind screens at display zones
  • Supports 2ch PCM and 7.1 multichannel audio up to DTS-X and Dolby Atmos
  • 2-way PoH (Power over HDBaseT™) enables either transmitter or receiver to be remotely powered by the other locally powered so mains power connectivity is not required at both source and display location
  • HDCP 2.2 compliant
  • 3D compatible
  • Switchable RS-232 function mode on transmitter and receiver for firmware update
  • Threaded bushings allow use of both standard and locking DC power plugs
  • Visual LED indication for power, display connection signal status, HDBaseT™ link, and HDCP presence in signal
  • Cable termination follows IEEE-568B standards
  • Automatically adjusts feedback, equalization and amplification of signal for easy installation
  • Energy efficient universal power supply included

WyreStorm EX-70-H2 Downloads

HDBaseT Full
HDMI Transmitter
HDMI Receiver
IR Pass Through
RS-232 Pass Through
48V PoE (Power over Ethernet) Transmitter
48V PoE (Power over Ethernet) Receiver

WyreStorm EX-70-H2 Specifications

Connectivity

Transmitter
Inputs 1 × HDMI In: 19-pin type A
Outputs 1 × HDBT Out: 8-pin RJ45 Female
1 × HDMI Out: 19-pin type A

Receiver

Inputs 1 × HDBaseT™ 8-pin RJ45 female
Outputs 1 × HDMI Loop Out: 19-pin type A

Communication and Control

IR 1 × IR TX: 3.5mm (1/8in) TS Mono
1 × IR RX: 3.5mm (1/8in) TRS Stereo
RS-232 1 × RS-232: 3-pin Terminal Block
Ethernet 1 × Ethernet: 8-pin RJ-45 Female

Resolution and Ma× Cable Length

Video Resolutions HDMI Cat6 Cat6a/7
1920×1080p @60Hz 12bit 15m 100m 100m
1920×1080p @60Hz 16bit 7m 100m 100m
3840×2160p @24Hz 10bit 4:2:0 HDR 3m 70m 100m
3840×2160p @30Hz 8bit 4:4:4 7m 70m 100m
3840×2160p @60Hz 10bit 4:2:0 HDR 3m 70m 70m
4096×2160p @60Hz 8bit 4:2:0 7m 70m 100m
4096×2160p @60Hz 8bit 4:4:4 3m 70m 100m

Processing

Output Video Encoding HDBaseT™ Class A
Encoding Data Rate 9.2Gbps
End To End Latency (max) 10μs (microseconds)
Audio Formats 2ch PCM, Multichannel up to DTS-X and Dolby Atmos
Supported Standards DCI, RGB, Dolby Vision @ 30Hz, HLG, HDR-10
Maximum Pixel Clock HDMI: 600MHz, HDBaseT: 297MHz

Communication and Control

HDMI HDMI, HDCP 2.2, EDID, DVI/D supported with adapter (not included)
HDBaseT™ HDMI, HDCP 2.2, EDID, 2-way PoH, Bidirectional IR, RS-232, and Ethernet
CeC CEC Pass-through - Requires CEC compatibility between source and display

Mechanical

Power Supply 18V DC 1A
Poh IEEE 802.3af 48V 15.4W Max, 2-way
Max Power Consumption 4.68W

Environmental

Operating Temperature 0 to + 45°C (32 to + 113 °F), 10% to 90%, non-condensing
Storage Temperature -20 to +70°C (-4 to + 158 °F), 10% to 90%, non-condensing
Maximum Btu 16 BTU/hr

Dimensions & Weight

Rack Units/wall Box <1U
Height 21mm/0.83in
Width 210mm/8.27in
Depth 94.8mm/3.7in
Weight 0.24kg/0.53lbs

Regulatory

Safety And Emission CE, FCC, RoHS, RCM

WyreStorm EX-70-H2 Optional Cables

DescriptionLengthPriceInc. VAT
WyreStorm EXP-4KUHD-0.5 High-speed 18Gbps 4K HDMI with HDR support 0.5m £13 £15.60
WyreStorm EXP-4KUHD-1.0 High-speed 18Gbps 4K HDMI with HDR support 1.0m £15 £18.00
WyreStorm EXP-4KUHD-2.0 High-speed 18Gbps 4K HDMI with HDR support 2.0m £17 £20.40
WyreStorm EXP-4KUHD-3.0 High-speed 18Gbps 4K HDMI with HDR support 3.0m £22 £26.40
WyreStorm EXP-4KUHD-5.0 High-speed 18Gbps 4K HDMI with HDR support 5.0m £45 £54.00
WyreStorm CAB-HAOC-10 24Gbps Active Optical HDMI (2K/4K/5K; HDR-10, HDR-10+; ARC; HDCP 2.3) 10.0m £154 £184.80
WyreStorm CAB-HAOC-15 24Gbps Active Optical HDMI (2K/4K/5K; HDR-10, HDR-10+; ARC; HDCP 2.3) 15.0m £168 £201.60
WyreStorm CAB-HAOC-15-C 24Gbps Active Optical HDMI with detachable head (2K/4K/5K; HDR-10, HDR-10+; ARC; HDCP 2.3) 15.0m £186 £223.20
More Cables for the WyreStorm EX-70-H2

WyreStorm HDBaseT Extender Kits

Product CodeDescriptionPriceInc. VAT
WyreStorm EX-100-H2 1:1 UHD HDMI / USB / PoH over HDBaseT 2.0 Extender Kit Max.100m at UHD with Cat6a/7 cable; 10.2Gbps £577 £692.40
WyreStorm EX-35-H2 1:1 4K HDR HDMI / RS-232 / PoH / IR over HDBaseT Extender Kit Max. 35m @ 4K 60Hz, 70m at HD 60Hz 16-bit £335 £402.00
WyreStorm EX-35-H2-ARC 1:1 4K HDR HDMI / RS-232 / PoH / IR over HDBaseT Extender Kit with ARC Max. 35m @ 4K 60Hz, 70m at HD 60Hz 16-bit £452 £542.40
WyreStorm EX-70-G2 1:1 4K HDMI / IR / RS-232 / PoH over HDBaseT Extender Kit Max. 35m at 4K with Cat6a/7 cable;9.2Gbps £194 £232.80