Kramer VP-558
11×4 Presentation Switcher/Scaler/Matrix
6 × HDMI, 4 × HDBaseT, 1 × VGA inputs; 4 × HDMI+HDBase outputs; 4:1 USB Swticher
£4987 (£5984.40 inc. VAT)
Availability: In stock
Availability: In stock
Kramer VP-558 (70-00558040)
The Kramer The VP-558 is a high performance 11x4 ProScale presentation scaler/matrix switcher that can output four independent scaled images. Each output includes an HDMI and HDBaseT connector. The product supports analog, digital and embedded audio. VP-558 features six HDMI inputs, four HDBaseT inputs, an Analogue VGA input, and a 4x1 USB switcher. VP-558 also includes a microphone input, independent stereo audio outputs, a monitor output, an amplified speaker output, and audio DSP features.
- Pix-Perfect™ Scaling Technology — Kramer's precision pixel mapping and high-quality full up | and down-scaling technology.
- HDTV Compatible.
- HDCP Compliance — The HDCP (High Definition Content Protection) license agreement allows copy-protected data on the HDMI input to pass to HDCP compliant outputs.
- Output Resolutions — Up to 1080p/WUXGA.
- System Range — For the HDBaseT inputs and outputs | up to 70m (230ft).
- Cables — For optimum range and performance using HDBaseT™, use Kramer's BC-HDKat6a cable. Note that the transmission range depends on the signal resolution, source and display used. The distance using non-Kramer CAT 6 cable may not reach these ranges.
- 4x1 USB Switcher — Can be set to follow the switching of the video layer or as an independent switcher.
- OSD (On Screen Display) — For easy setup and adjustment, accessible via the front panel buttons.
- Audio DSP Features.
- Input/Output Audio Level Adjustment.
- Selectable Microphone Talkover or Mix Modes.
- Analogue & Embedded Audio Support — For inputs and outputs.
- Built-in Power Amplifier — 2x10W power amplifier with speaker outputs on a 4-pin terminal block connector.
- Multiple Aspect Ratio Selections.
- Built-in ProcAmp — colour, hue, sharpness, noise, contrast and brightness.
- Built-in Web Pages — For easy setup and remote control.
- Firmware Upgrade via the Ethernet
- Multiple Control Options — Front panel buttons with OSD, RS-232, Ethernet and built-in Web pages.
- 7 year warranty (Click Here for details)
Kramer VP-558 Specifications
Connectivity |
|
Inputs | 6 HDMI connectors, 1 VGA on a 15-pin HD connector, 4 HDBaseT on RJ-45 connectors, 4 USB ports, 6 unbalanced Analogue audio on 3.5mm mini jacks for HDMI, 1 unbalanced Analogue audio on a 3.5mm mini jack for PC, 1 aux in/mic balanced stereo audio on a 5-pin terminal block connector |
Outputs | 4 HDBaseT on RJ-45 connectors, 4 HDMI connectors, 1 USB port, 4 audio out balanced stereo on 5-pin terminal block connectors, 4 audio out S/PDIF on RCA connectors, monitor out balanced stereo on a 5-pin terminal block connector, monitor out S/PDIF on an RCA connector |
1 stereo speaker output, 2x10W into 4Ohms, on a 4-pin terminal block connector | |
Scaling |
|
Output Resolutions | NATIVE VGA (640x480)@60Hz SVGA (800x600)@60Hz XGA (1024x768)@60Hz WXGA (1280x768)@60Hz WXGA (1360x768)@60Hz WXGA (1280x720)@60Hz WXGA (1280x800)@60Hz SXGA (1280x1024)@60Hz WXGA+ (1440x900)@60Hz SXGA+ (1400x1050)@60Hz WSXGA+ (1680x1050)@60Hz UXGA (1600x1200)@60Hz 1920x1080@60Hz WUXGA (1920x1200)@60Hz 720x480p@60Hz 1280x720p@60Hz 1920x1080i@60Hz 1920x1080p@60Hz 720x576p@60Hz 1280x720p@50Hz 1920x1080i@50Hz 1920x1080p@50Hz |
Mechanical |
|
Controls | HDMI 1, HDMI 2, HDMI 3, HDMI 4, HDMI 5, HDMI 6, HDBT 1, HDBT 2, HDBT 3, HDBT 4, PC, USB 1, USB 2, USB 3, USB 4 input selector buttons |
Menu, enter, menu arrows, reset to XGA/720p, OSD SELECT, 2 RS–232, Ethernet, line/mic selector switch, cond/dyn (48V) selector switch, mono/stereo selector switch, REM for muting audio | |
Power | 100-240V AC, 70VA max |
Operating Temp. | 0° to +40°C (32° to 104°F) |
Storage Temp. | -40° to +70°C (-40° to 158°F) |
Humidity | 10% to 90%, RHL non-condensing |
Product Dimensions | 19"×14.37×2U (43.6cm×36.50cm×8.80cm) W, D, H |
Product Weight | 5.0kg (11.0lbs) approx. |
Shipping Dimensions | 52.60cm×47.50cm×18.40cm (20.71"×18.70"×7.24") W, D, H |
Shipping Weight | 6.3kg (13.9lbs) approx. |
Accessories | Power cord, rack "ears" |