Emailsales@ivojo.co.uk Telephone0844 332 0530
Shopping Cart Shopping Cart

Hall Research UHBX-6S-E

1:6 HDBaseT Distribution Amplifier with local HDMI output
1 x HDMI input; 1 x HDMI, 6 x HDBaseT outputs; Max 150m @ 1080p

£2099 (£2518.80 inc. VAT)
Availability: In stock

Hall Research UHBX-6S-E Description

The UHBX-6S is an HDMI splitter with one local HDMI output and 6 HDBaseT™ outputs for extension to compatible receivers up to 150 meters using a single UTP. The Splitter supports HDCP, 3D, Deep Color and CEC. EDID management is integrated into the unit with "Pass-thru", "Learn", and "Emulate" features. Advanced users can use the USB port to download, edit, and upload EDID data to and from the device. The unit provides an RS-232 port that can individually address and control remote displays that feature RS-232 interface. The UHBX-6S provides convenient front panel LED status indicators for all HDBaseT™ parameters to quickly verify proper operation.

The UHBX-6S supports PoH (Power over HDBaseT™). Compatible receivers are powered from the sender using PoH standard so no additional power supplies are needed. The HDBaseT™ compliant PoH performs all necessary low voltage handshakes prior to injecting supply on the UTP line for maximum reliability, safety, and compliance.

Compatible receivers include the economical UH-BT-R & UH-BTX-R for HDMI only or the UHBX-R-PD that supports RS-232, PoH, and Long Reach modes.

Hall Research UHBX-6S-E Key Features

  • Extend HDMI video to 6 remote displays using HDBaseT™
  • Use a single UTP cable to extend video to 100 meters (330 ft)
  • Can send 1080p to 150 meters (500 ft) to Long Reach capable receivers
  • Supports virtually all HDMI and DVI resolutions
  • Local HDMI output for direct connection to a local display
  • EDID management with USB port for EDID manipulation using a PC
  • RS-232 port for sending commands to remote displays
  • Power-over-HDBaseT™ meets IEEE 802.3af standard

Hall Research UHBX-6S-E Specifications

Input Port 1x HDMI Female (Type A)
Output Port 1x HDMI Female (Type A), 6 RJ45 connectors
Standards DVI (single link) and HDMI (compliant with HDMI 1.4 video specifications including 12 bit Colour depth and 3D video)
Signal Type HDBaseT
Connectors Locking HDMI
Video Resolutions DVI signal VGA (640x480) thru WUXGA (1920x1200) HDTV signal 480i through 1080p
Digital Cinema 4K@60 Hz (4:2:0 8 bit Colour ) or 4K@30 Hz (4:4:4 and 8 bit Colour ) (No Supported in Long Reach)
Audio Formats All HDMI Embedded Audio including: LPCM 7.1CH, Dolby TrueHD and DTS-HD Master Audio (32-192kHz sample rate)
DDC Pass-Thru DDC for reading EDID directly from remotely connected LCD and HDCP handshake
CEC Pass-Thru CEC for Consumer Electronics Control compatible devices
RS232 Bidirectional (full-duplex) any baud rate up to 115, 200
PoH Power-over-HDBaseT meets IEEE 802.3af standard. PD side identifies as Class 2 (3.84–6.49 watts). Actual power consumption of PD side is 5.5 watts max
Power Supply 100 VAC to 240 VAC, 50-60 Hz, external; 48VDC 1.5A
Power Sender: 10.15 watts maximum
Temp/humidity Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, non-condensing
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, non-condensing Convection
Cooling Convection
Mounting Threaded nuts on bottom for rack-shelf mounting or optional rack ears
Enclosure Type Metal (Aluminum ends, Aluminum Extrusion)
Dimensions 1.66" H x 11.23" W x 6.59" D
(42mm H x 285mm W x 167mm D)
Product Weight Product – 4.5 lbs (2.05 kg)
Shipping – 5.5 lbs (2.49 kg)
Vibration ISTA 1A in carton (International Safe Transit Association)
Safety CE
MTBF 90, 000 hours (Calculated Estimate)
Warranty 3 years parts and labour

Hall Research UHBX-6S-E Usage Diagram

Hall Research UHBX-6S-E Usage Diagram

Hall Research UHBX-6S-E Compatible Products

Product CodeDescriptionPriceInc. VAT
Hall Research UHBX-R-PD 1:1 HDBaseT HDMI/IR/RS-232/PoE over Twisted Pair Receiver
(1 x HDBaseT input; 1 x HDMI output; Max 100m @ 1080p)
£389 £466.80