ivojo
Multimedia
Emailsales@ivojo.co.uk Telephone0844 332 0530
Shopping Cart Shopping Cart
> > > > Gefen
> > > > Gefen
> > > > Gefen

Gefen EXT-HD2IRS-LAN-TX

1:1 HDMI, RS-232 and IR over IP transmitter

£302 (£362.40 inc. VAT)
Availability: In stock

Gefen EXT-HD2IRS-LAN-TX Description

The HD over IP w/ RS-232 and 2-way IR extends HDMI, RS-232, and bi-directional IR over a Gigabit Local Area Network. Resolutions up to 1080p Full HD and 1920 x 1200 (WUXGA), HDCP, Deep Color, 7.1 channel High Bit Rate digital audio, and Lip-Sync pass-through are supported. The Sender and Receiver units can be automatically or manually configured to unique IP addresses to allow the connection of multiple Senders and Receivers to the same network. Multiple Receiver units can simultaneously connect to any Sender unit within the network including the Gefen KVM over LAN products with HDMI, DVI, or VGA video, to create a virtual crosspoint matrix of just over 65,000 Sender and Receiver units total, depending on the network bandwidth and number of ports on the network switch (see Notes 1 and 2).

IR control can be extended from Sender to Receiver and from Receiver to Sender, allowing the control of source units and displays remotely. The IR input ports on Sender and Receiver units can accommodate both the Gefen powered IR extender EXT-RMT-EXTIRN and electrical IR from automation control devices. RS-232 serial control can also be extended between each Sender and Receiver unit. The built-in web server interface makes control, set-up, and configuration simple and intuitive. When using multiple Senders and Receivers as a "Virtual Matrix", you can connect to any of the Senders within the network by accessing the web interface of each Receiver unit via a web browser on a mobile device or computer, or by using the Gefen KVM/Video over IP Keyboard Switching Controller software (available for download at www.gefen.com). The Gefen HD over IP extender is the perfect solution for large scale remote HD content access and digital signage applications.
How it Works


If you will be connecting multiple Sender units, use the built-in web interface to assign a unique channel ID to each unit. Use the included HDMI cable to connect an HDMI source to the Sender's HDMI input. Using the included mini-phone-plug-to-female-DB-9 adaptor, connect a DB-9 male-to-female RS-232 cable from the Sender unit to an automation control device. If IR extension between the local and remote locations to control the source and the display is needed, connect IR emitters (Gefen part no. EXT-IREMIT) (one included with Sender unit) to the Sender and Receiver units IR Out ports and attach them to the IR sensor lenses of the source and the display. Connect IR extenders (Gefen part no. EXT-RMT-EXTIRN) (one included with the Receiver unit) or electrical IR outputs from automation control devices to the IR In/Ext ports of the Sender and Receiver units. Using an HDMI cable, connect the HDMI output of the Receiver unit to your display. Using the included mini-phone-plug-tomale-DB-9 adaptor, connect another male-to-female DB-9 cable from the Receiver unit to the display or another RS-232 controlled device. Connect the Sender and Receiver units to each other directly or through a Gigabit Ethernet switch, using CAT-5e or better cables. Each cable run can be up to 330 feet (100 meters) in length. Connect the included 5V power supplies to the Sender and Receiver units and to available electrical outlets. Power-on all associated equipment. Use the Mode selector within the web interface to optimize the picture for sharper still images or smoother video motion.


Notes:

A Gigabit switch is required. The Gigabit switch must support 8k jumbo frame packets in order for multicast mode to operate. If your LAN is not dedicated to Gefen KVM-LAN products exclusively, then a managed switch is highly recommended.

When using HDCP-encrypted content, only HDMI Senders and Receiver units can accept and display the content. See also: Gefen EXT-HD2IRS-LAN-RX.

Gefen EXT-HD2IRS-LAN-TX Key Features

  • Extends HDMI, RS-232, and bi-directional IR over IP, using a Gigabit Local Network
  • Supports resolutions up to 1080p Full HD and 1920 x 1200 (WUXGA)
  • Supported HDMI Features - HDCP, Deep Color, LPCM 7.1 audio, Dolby® TrueHD, and DTS-HD Master Audio™, Lip-Sync pass-through
  • Built-in web interface facilitates intuitive set up and operation
  • Any of the Senders within a network can be accessed by any Receiver unit via a web browser on a mobile device or computer, or by using the Gefen KVM/Video over IP Keyboard Switching Controller software (available for download at www.gefen.com)
  • Supports a total of just over 65,000 Sender and Receiver units, depending on the network bandwidth and number of ports on your network switch
  • Mode Selector function in web interface for sharpness or motion optimization of image
  • Versatile IR In/Ext ports work with powered Gefen IR extenders and electrical IR from automation control devices
  • Field-upgradable firmware via web server interface
  • Locking power supply connectors
  • RS-232 3.5mm mini-stereo-jack-to-DB-9 adaptors included
  • Surface mountable


Gefen EXT-HD2IRS-LAN-TX Specifications

Maximum Pixel Clock 165 MHz
Maximum TMDS Clock 225 MHz
Video Input Connector 1 x HDMI Type A 19-pin, female, locking
RS-232 ports 1 x 3.5mm mini-stereo jack (DB-9 adaptors included)
IR Emitter ports 1 x 3.5mm mini-mono jack
IR In/Extender ports 1 x 3.5mm mini-stereo jack
IR Extender EXT-RMT-EXTIRN
Ethernet connectors 1 x RJ-45, shielded
Reset buttons 1 x tact-type, recessed
Link Indicator 1 x LED, amber
Power Indicator 1 x LED, green
Power Supply 5V DC, locking
Power Consumption 6W maximum
Operating Temperature 0 to +50 °C
Operating Humidity +10 to +90%, Relative Humidity, non-condensing
Storage Temperature -20 to +85 °C
Storage Humidity 0 to +95%, Relative Humidity, non-condensing
MTBF 50000 hours
Dimensions (W x H x D) 4.3" x 1" x 3.2"
(110mm x 26mm x 80mm)
Unit Weight 0.4 lbs. (0.2 kg)
Shipping Weight 2.0 lbs. (0.9 kg)
In The Box 1 x HDMI over IP with RS-232 and Bi-Directional IR - Sender Unit EXT-HD2IRS-LANS)
1 x 6 ft. HDMI cable (M-M) (CAB-HD-LCK-06MM)
1 x Mini Phone to DB9 adapter (M-F) (ADA-MP-2-DB9-MF-AB)

1 x Single Infrared Emitter (EXT-IREMIT)

1 x 5V DC Power Supply (EXT-PS526AIP-LP)

1 x Quick-Start Guide (QSG-EXT-HD2IRS-LAN)


Gefen EXT-HD2IRS-LAN-TX Usage Diagram



Gefen EXT-HD2IRS-LAN-TX Usage Diagram


Gefen EXT-HD2IRS-LAN-TX Compatible Products

Product CodeDescriptionPriceInc. VAT
Gefen EXT-HD2IRS-LAN-RX 1:1 HDMI, RS-232 and IR over IP receiver £324 £388.80




Gefen EXT-HD2IRS-LAN-TX Possible Alternatives

Product CodeDescriptionPriceInc. VAT
CYP IP-6000RX 1:1 HDMI/VGA with USB over IP receiver
(1 x RJ45, 1 x 3.5mm mic inputs; 1 x HDMI, 1 x HD15, 1 x RS-232, 1 x 3.5mm IR emitter, 4 x USB Type B, outputs)
£357 £428.40
CYP IP-6000TX 2:1 HDMI/VGA with USB over IP transmitter
(1 x HDMI, 1 x HD15, 1 x 3.5mm stereo mini-jack, 1 x USB Type B, 1 x RS-232 inputs; 1 x RJ45, 1 x HD15, 1 x 3.5mm stereo mini-jack, 1 x 3.5mm IR outputs)
£357 £428.40
CYP IP-7000TX 2:1 4K HDMI/VGA with USB over IP transmitter
(1 x HDMI, 1 x HD15, 1 x 3.5mm stereo mini-jack, 1 x USB Type B, 1 x RS-232 inputs; 1 x RJ45, 1 x HD15, 1 x 3.5mm stereo mini-jack, 1 x 3.5mm IR outputs)
£419 £502.80
Kramer KDS-DEC3 1:1 H.264 Decoder
(Decode H.264 to HDMI from transmission over IP networks)
£778 £933.60
Kramer KDS-DEC4 1:1 HD HDMI over IP receiver/decoder £584 £700.80
Kramer KDS-DEC6 1:1 4K 60Hz HDCP 2.2 video over IP receiver/decoder with PoE £599 £718.80
Kramer KDS-EN2R 1:1 HDMI over IP receiver
(Point to point, Multicasting & broadcasting architecture)
£498 £597.60
Kramer KDS-EN2T 1:1 HDMI over IP transmitter
(Point to point, Multicasting & broadcasting architecture)
£498 £597.60
Kramer KDS-EN3 1:1 HDMI/VGA to H.264 Encoder, Recorder and Streamer
(Encode HDMI up to 1080p for transmission over IP networks)
£1301 £1561.20
Kramer KDS-EN4 1:1 HD HDMI over IP Encoder/streamer £584 £700.80
Kramer KDS-EN5 1:1 4K 60Hz H.264 Encoder £778 £933.60
Kramer KDS-EN6 1:1 4K 60Hz HDCP 2.2 video over IP transmitter/encoder with PoE £599 £718.80
Lightware VINX-110-HDMI-DEC 1:1 AV Over IP Scaling Multimedia Decoder with USB KVM, RS-232 and IR £520 £624.00
Lightware VINX-120-HDMI-ENC 1:1 AV Over IP Scaling Multimedia Encoder with USB KVM, RS-232 and IR £520 £624.00