sales@ivojo.co.uk
01348 840080
WyreStorm CON-H2-SCL
1:1 4K HDMI Scaler with audio breakout
1 × HDMI Input; 1 × HDMI output; Max Resolution 4K 4096×2160
£317 (£380.40 inc. VAT)
Availability: Please Call
Availability: Please Call
WyreStorm CON-H2-SCL
An essential tool when mixing 4K & 2K screens on the same distribution system, the CON-H2-SCL enables in-line scaling of HDMI content. An HDMI signal from a source device, DA or matrix is converted so that it can be accepted by the connected display. Via a powerful scaling chip, 4K/60 4:4:4 or 4:2:0 can be down-scaled to as low as 480P; likewise, content can be up-scaled to 4K/60 4:4:4. Set up & configuration is done using a simple PC tool which is part of WyreStorm Management Suite V1.6. The software tool allows management of the scaling function and EDID via a simple interface.
WyreStorm CON-H2-SCL Key Features
- Scales any incoming HDMI content to as low as 800×600 or up to 4096×2160
- Compatible with incoming 18Gbps HDMI content up to 2160p 4:4:4/60
- Converts HDR content and removes metadata for compatibility with all displays
- Converts HDCP encryption to match that of a connected display or projector
- Optical audio output for de-embedded source audio (2ch PCM)
- Setup & configuration via simple PC configuration tool (WyreStorm Management Suite v1.6 or higher)
- Powered by 12v DC power supply (US, UK, EU and AU PSU pins included)
- Mounting brackets included
- USB-3-pin phoenix cable required for setup (not included) – use p/n CAB-USB-PX1
- Full scaling list: Auto set (based on EDID from display) 4096×2160/60, 4096×2160/30, 4096×2160/25, 4096×2160/24, 3840×2160/60, 3840×2160/50, 3840×2160/30, 3840×2160/25, 3840×2160/24, 1920×1200/60, 1920×1080/60, 1920×1080/50, 1280×720/60, 1280×720/50, 1680×1050/60, 1600×1200/60, 1600×900/60, 1440×900/60, 1366×768/60, 1360×768/60, 1280×1024/60, 1280×960/60, 1280×800/60, 1280×768/60, 1024×768/60, 800×600/60
WyreStorm CON-H2-SCL Downloads
WyreStorm CON-H2-SCL Specifications
Connectivity |
|
| Inputs | 1x HDMI In: 19-pin HDMI Type A Receptacle1x Audio In: 3.5mm TRS Stereo Jack Socket1x IR RX: 3.5mm TRS Jack Socket |
| Outputs | 1x LAN (PoE): 8P8C “RJ45” Socket ANSI/TIA-5681x Audio Out: 3.5mm TRS Stereo Jack Socket1x USB Host: USB 2.0 Type B Receptacle1x RS-232: 3-pin Phoenix1x IR TX: 3.5mm TS Jack Socket |
TRANSMISSION |
|
| Transmission Encoding | Proprietary stream encoding. Video compression based on JPEG 2000Dante / AES67 compliant audio stream encoding |
| End To End Latency | With RX, 1 video frame (Passthrough mode) 2 video frames (scaling/video wall) e.g. 16ms @ 60Hz |
| Max Transmission Bit Rate | 850Mb/s |
VIDEO |
|
| HDMI | 300MHz Max.TMDS Clock |
| Maximum Data Rate | 8.91Gb/s HDMI |
| Video Resolutions (max) | 1280×720p @60Hz 12bit 4:4:4/RGB1920×1080i @30Hz 12bit 4:4:4/RGB1920×1080p @60Hz 12bit 4:4:4/RGB3840×2160p @/30Hz 10/12bit 4:2:2/4:2:0 HDR10 HLG3840×2160p @30Hz 8bit 4:4:4/RGB3840×2160p @60Hz 8bit 4:2:0720×480p @60Hz 12bit 4:4:4/RGB720×576p @50Hz 12bit 4:4:4/RGB60fps Progressive 4:4:4/RGB: 640×480 | 800×600 | 1024×768 | 1280×800 | 1280×960 | 1280×1024 |1360×768 | 1366×768 | 1400×1050 | 1440×900 | 1600×1200 | 1680×1050 | 1920×1200Passthrough mode: Output at RX matches input at TX except for:1) YUV 4:2:0 converted to 8bit RGB2) For resolutions above 1920×1200 at 50/60Hz framerate is halvedScaler mode:User-selectable scaled output1) All formats converted to 8bit RGB2) Up to 3840×2160p @30Hz |
| Supported Standards | HDR10 | HLG | BT.2020 | BT.709 | 3D Video |
Audio |
|
| Audio Formats | PCM up to 8ch | Bitstream audio formats including Dolby Atmos & DTS:X2ch Analogue Dante: Up to 2ch PCM (HDMI) | 2ch Analog |
Connectivity |
|
| Ethernet | IEEE 802.1ab 1000BASE-T |
| HDCP | HDCP 2.2 | 1.x |
| EDID | Programmable EDID | EDID Copy/Import | Custom EDID |
| RS-232 | Programmable RS-232 Commands | Custom Command Generation (RX Only) |
| Ir | Custom Command Generation |
| Dante | Full compatibility with Audinate control and management software tools for Dante |
Installation & mounting |
|
| Compatible Rack Mount Kit | NHD-000-RACK4 |
| In The Box | Wall Mount Brackets | Brackets for NHD-000-RACK4 | Infrared Cables | RS-232 Terminal Block |
| Orientation | Observe product chassis text |
Power |
|
| Power Over Ethernet | IEEE 802.3af (15.4W at PSE) |
| External Power Supply | Optional part: PSU-12V-1A |
| Nominal Power Consumption | 8W |
Environmental |
|
| Operating Temperature | +32°F ~ +104°F (0°C ~ +45°C) | 10% ~ 90% non-condensing |
| Storagetemperature | -4°F to ~ 140°F (-20°C ~ +70°C) | 10% ~ 90% non-condensing |
| Maximum Btu | 51.18 BTU/hr |
Dimensions & Weight |
|
| Rack Units/wall Box | <1U Flat on Shelf | 6U in NHD-000-RACK4 |
| Height | 25mm/1in |
| Width | 220mm/8.67in |
| Depth | 130mm/5.12in |
| Weight | 0.75kg/1.65lbs |
Regulatory |
|
| Safety And Emission | CE | FCC | RoHS | EAC | RCM |
WyreStorm CON-H2-SCL Optional Cables
| Description | Length | Price | Inc. VAT | |
| WyreStorm EXP-4KUHD-0.5 High-speed 18Gbps 4K HDMI with HDR support | 0.5m | £13 | £15.60 | |
| WyreStorm EXP-4KUHD-1.0 High-speed 18Gbps 4K HDMI with HDR support | 1.0m | £15 | £18.00 | |
| WyreStorm EXP-4KUHD-2.0 High-speed 18Gbps 4K HDMI with HDR support | 2.0m | £17 | £20.40 | |
| WyreStorm EXP-4KUHD-3.0 High-speed 18Gbps 4K HDMI with HDR support | 3.0m | £22 | £26.40 | |
| WyreStorm EXP-4KUHD-5.0 High-speed 18Gbps 4K HDMI with HDR support | 5.0m | £45 | £54.00 | |
| WyreStorm CAB-HAOC-10 24Gbps Active Optical HDMI (2K/4K/5K; HDR-10, HDR-10+; ARC; HDCP 2.3) | 10.0m | £154 | £184.80 | |
| WyreStorm CAB-HAOC-15 24Gbps Active Optical HDMI (2K/4K/5K; HDR-10, HDR-10+; ARC; HDCP 2.3) | 15.0m | £168 | £201.60 | |
| WyreStorm CAB-HAOC-15-C 24Gbps Active Optical HDMI with detachable head (2K/4K/5K; HDR-10, HDR-10+; ARC; HDCP 2.3) | 15.0m | £186 | £223.20 |