Emailsales@ivojo.co.uk Telephone0844 332 0530
Shopping Cart Shopping Cart

Lightware DVI-HDCP-TPS-TX97

1:1 HDBaseT DVI/IR/RS-232/Ethernet/PoE over Twisted Pair Transmitter
Max. 100m at 4K or 170m at 1080p

£450 (£540.00 inc. VAT)
Availability: In stock

Lightware DVI-HDCP-TPS-TX97 (91540026) Description

The Lightware DVI-HDCP-TPS-TX97 and DVI-HDCP-TPS-RX97 twisted pair HDBaseTTM extenders provide extension of uncompressed 4K/UHD video with embedded audio (up to eight channel PCM or HBR audio) for long distances over a single CATx twisted pair cable. The unit offers bi-directional RS-232, IR, and Ethernet pass-through on the same CATx cable that carries the video signal. The TPS extenders support full HDCP and EDID compliance and work on all standard AV resolutions up to 4K and 48-bit color depth handling all standard audio formats and also 120 Hz 3D signals. PoE 48V remote powering is available through a single CATx cable, but a local power supply can also be used. All devices can be mounted on a rack shelf or used standalone.

The auto operation mode allows the device to detect the far end extender’s mode and adopt it. If the far end device is in auto mode or if it is a third party HDBaseTTM device the link will be set to HDBT mode. If the far device is in forced Long Reach Mode then the auto operation will set the Link to Long Reach Mode. The IR OUT can operate in either Wired (unmodulated) or Emitter (modulated) mode.

DVI-HDCP-TPS-TX97 and DVI-HDCP-TPS-RX97 are compatible with HDBaseT extenders and matrix switchers. See also: Lightware DVI-HDCP-TPS-RX97.

Lightware DVI-HDCP-TPS-TX97 Key Features

  • DVI and HDMI extension over a single CAT7 cable
  • Two available operation modes to maximize potential cable length
  • Operation mode switch (Auto or forced Long reach mode)
  • Low power mode in Auto operation mode
  • 10/100 Ethernet extension
  • Bi-directional RS-232 pass-through
  • Bi-directional IR pass-through
  • Supports all DVI resolutions up to 1080p or 1920x1200
  • Supports all HDMI 1.4 resolutions
  • Compatible with 120 Hz 3D video signals
  • Remote powered through CATx cable
  • HDCP 2.2 compliant, EDID transparent
  • Uncompressed video/audio up to 10,2 Gbps
  • Live, Link detection, Video and HDCP detection LEDs
  • Rack mounting options
  • Locking DC connector
  • Order Code: 91540026

Lightware DVI-HDCP-TPS-TX97 Specifications

Data Rate 3.4 Gbps per Colour
Resolution All HDMI 1.4a resolutions supported
Equalization Adaptive, automatic
EDID Support Transparent
HDCP Pass-through Yes
Ethernet Pass-through Yes
RS-232 Pass-through Yes
IR Pass-through Yes
Overall Signal Delay 10µs (including 100m CATx cable)
Power universal power adaptor, DC 12 V 2.5 A
Power Consumption 3.6 W (typ) 4.2 W (max)
Enclosure 1 mm metal
Dimensions 100.4 W x 100.4 D x 26 H mm
Net Weight 330 g / product
Compliance CE
Warranty 3 years


Tx Input, Rx Output DVI connector
Tx Output, Rx Input RJ45 (TPS interface)
Ethernet RJ45
IR In, Out 3.5 mm TRS connector (1/8'' mini-jack)
Serial Port 9-pole D-sub
Power locking DC connector (2.1 / 5.5 mm)

Lightware DVI-HDCP-TPS-TX97 Usage Diagram

Lightware DVI-HDCP-TPS-TX97 Usage Diagram

Lightware DVI-HDCP-TPS-TX97 Compatible Products

Product CodeDescriptionPriceInc. VAT
Lightware DVI-HDCP-TPS-RX97 1:1 HDBaseT DVI/IR/RS-232/Ethernet/PoE over Twisted Pair Recevier
(Max. 100m at 4K or 170m at 1080p)
£450 £540.00