The EL-2600V presentation switcher is designed for use in environments needing a wide range of flexibility when it comes to inputs, outputs, and control. The three most common video input interfaces (HDMI, DisplayPort, and VGA w/stereo audio) are included, providing the ultimate in source compatibility and flexibility. The HDMI and DisplayPort inputs support resolution/timing up to a maximum of 4K@60Hz (4:4:4, 8-bit) which is converted, when appropriate and necessary, for transmission over HDBaseT. The selected source (video & audio) can be transmitted over Cat.6/7 cable up to 100 meters (at 4K@60Hz) along with bidirectional Ethernet, RS-232, USB, and IR. Due to the matrixing capability of this unit, an independent source may also be selected for output over the local HDMI output. The EL-2600V also includes a microphone input, with optional 48V/5V phantom power support, feeding directly into a DSP mixer, offering the complete presentation solution.
When paired with the PUV-2600RX (Not Included), up to 3 switchable USB 2.0 host (Type-B) connections are available (2 on the Transmitter, 1 on the Receiver) which connect to up to 6 USB 2.0 (Type-A) device ports (3 on the Transmitter, 3 on the Receiver) for a multi-source, bidirectional, and highly flexible KVM configuration or interactive displays (Note: Only 1 USB host may be active at a time). This Transmitter also provides an interface for a remote control keypad, or trigger interface, which can be easily installed within a lectern or table in a conference room or classroom.
The EL-2600V can be powered locally using a standard power supply, or it can be powered by 48V PoH (Power over HDBaseT) provided by the PUV-2600RX (Not Included), allowing for greater flexibility within different installation scenarios. This unit is controllable via front panel controls, WebGUI, Telnet, Triggers, and RS-232.
|Inputs||2 × HDMI for HDMI Uncompressed AV and Data|
|1 × Display Port for Display Port Uncompressed AV|
|1 × 15pin D-sub for VGA RGBHV|
|2 × 3.5mm Stereo mini-jack for Analogue Stereo(L/R)|
|1 × Phoenix (10 pin) for Trigger In (8)|
|1 × RJ45 for LAN Serving|
|2 × USB Type B for Propriety Data|
|1 × 3.5mm Stereo mini-jack for RS-232|
|1 × Phoenix (3 pin) for RS-232|
|1 × 3.5mm Stereo mini-jack for Infra Red Receiver|
|1 × 6.35mm Stereo Jack for Microphone|
|Outputs||1 × HDMI for HDMI Uncompressed AV and Data|
|1 × RJ45 for HDBaseT 2.0 HDMI & Propriety Data|
|1 × Phoenix (5 pin) for Analogue Stereo (Balanced or Unbalanced)|
|1 × 3.5mm Stereo mini-jack for Infra Red Emitter|
|3 × USB Type A for Propriety Data|
|Dimensions||158mm W × 231mm D × 44mm H|
|Product Code||Description||Price||Inc. VAT|
2x2 HDBaseT 2.0 receiver |
(1 × HDMI, 1 × HDBaseT inputs; 2 × HDMI outputs)