Emailsales@ivojo.co.uk Telephone01348 840080
Shopping Cart Shopping Cart
  1. Home
  2. Projectors
  3. Fujifilm
  4. Fujifilm FP-Z8000-B Specifications
  5. Throw Chart

Fujifilm FP-Z8000-B

Fujifilm FP-Z8000-B 8000 ANSI Lumens WUXGA projector product image. Click to enlarge.
Fujifilm FP-Z8000-B 8000 ANSI Lumens WUXGA projector product image Fujifilm FP-Z8000-B 8000 ANSI Lumens WUXGA projector product image Fujifilm FP-Z8000-B 8000 ANSI Lumens WUXGA projector product image

Fujifilm FP-Z8000-B Key Features

  • 8000 ANSI Lumens
  • Native Widescreen
  • WUXGA 1920*1200 Native Resolution
  • 20000 hour lamp life (typical)
  • 12000:1 Contrast Ratio
  • 360° Installation
  • Ultra Short Throw
  • Native Widescreen
  • Lens Shift
  • Curved Surface Projection
  • Direct Power On
  • Horizontal & Vertical Keystone Correction
  • Direct Power Off
  • Image Over Network
  • Portrait Mode
  • HDBaseT
  • Can Be Installed Vertically
  • Edge Blending
  • DICOM Simulation Mode
  • Network Control
  • 18.4kg (40.6lb.)
  • Unique Folding Lens Design
  • Click for Fujifilm FP-Z8000-B Detailed Specifications
£14154 (£16984.80 inc. VAT)
Availability: 3-5 days
Throw Calculator


Size Range: 151 to 646cm
Lens Minimum
Throw		 Maximum
Throw		 Foot
Lamberts
Standard Lens 0.51m 0.56m 522
Click for Throw Calculator

Fujifilm FP-Z8000-B Throw Chart

Fujifilm FP-Z8000-B throw distance chart
How the graph works

Along the horizontal axis is the distance in metres between the front of the projector and the projection screen. Up the vertical axis is the width of the image the projector will produce. We use width rather than diagonal as the width will remain consistent with the throw distance and zoom setting whereas the height and therefore the diagonal will vary depending on the source. For example, if you have a 4:3 aspect ratio projector and use it to watch a 16:9 aspect ratio DVD then the image will be "letterboxed", i.e. the width will remain the same but the height will be reduced.

Show Imperial

Projector Throw From Screen Size Table (16:10 aspect ratio, in metres)
Diag.WidthHeightMin. ThrowMax ThrowAreaNits
0.76 0.640.400.220.240.26²9809.4
1.00 0.850.530.290.310.45²5665.9
1.50 1.270.790.430.471.01²2518.2
2.00 1.701.060.580.631.80²1416.5
2.50 2.121.320.720.782.81²906.5
3.00 2.541.590.860.944.04²629.5
3.50 2.971.851.011.105.51²462.5
4.00 3.392.121.151.267.19²354.1
4.50 3.822.381.301.419.10²279.8
5.00 4.242.651.441.5711.24²226.6

Nits are a measure of the brightness of the final image. Multiply the figure in the Nits column by the gain of your screen to obtain a true figure.

Projector lamps dim over their life spans so make allowances by multiplying the foot nits by 0.75 to get a reasonable average.If you intend to calibrate your projector then this will also affect brightness. For home cinema use in a well darkened roon, about 42-70 Nits is ideal. For office use, aim for at least 175.

Screen Size For Given Throw Table
Throw Min. Width Max. Width
0.50 1.35 1.47
0.50 1.35 1.47
0.78 2.10 2.28
1.05 2.84 3.09
1.33 3.59 3.90
1.60 4.33 4.71
1.88 5.08 5.53
2.15 5.82 6.34