Emailsales@ivojo.co.uk Telephone01348 840080

WyreStorm SW-130-TX-UK

3:1 HDMI/ USB-C over HDBaseT Transmitter wall plate

2 × HDMI, 1 × USB-C input; 1 × HDBaseT Output; Max. 100m @at UHD / HD

£586 (£703.20 inc. VAT)
Availability: Please Call

WyreStorm SW-130-TX-UK

3 inputs and powerful HDBaseT transmission result is this powerful switching transmitter, perfect for corporate meeting and classroom environments. Automatic or manual switching of 2 HDMI’s or USB-C and CEC power triggering via HDBaseT mean a simple user experience when it matters most. Further functionality allows USB devices to be routed back to the source via USB host (or natively via USB-C) and charging for the connected USB-C device.

3-INPUT SWITCHING TRANSMITTER

Setting a new standard for in-wall HDBaseT transmission, the SW-130-TX-US brings features of the WyreStorm range of professional switchers and packs them into a 2-gang form factor. Automatic or manual switching of the 3 connected sources (2 HDMI and USB-C) is possible with the USB-C supporting alt-mode functionality allowing a portable device such as a tablet or phone to be connected and send its content at up to 4K/30. HDCP 2.2 is also supported for the transmission of encrypted content.

USB 2.0 PASS-THROUGH

HDBaseT2.0 affords the addition of USB 2.0 pass-through, offering not only KVM functionality for extension of a keyboard/mouse or touchscreen but also full data transfer capabilities. The SW-130-TX has a USB host port allowing USB device data to be routed into the selected laptop (via HDMI). Going further, it can send USB device data natively through the USB-C port allowing a single cable to be used for A/V and USB device connectivity.

FEATURES TURNED UP TO 11

It’s not all about the A/V when it comes to HDBaseT; with increased functionality on all fronts, the SW-130-TX can be used to send power triggers to a compatible connected screen, allowing centralized control and is PoH compatible meaning it can be passively powered over HDBaseT from a compatible receiver. The SW-130-TX can even power & charge a phone or tablet connected to the USB-C port so you don’t run out of juice mid-flow (max. 5v 2A)

HDCP 2.2 COMPATIBLE

The industry’s latest encryption standard designed to stop the illegal copying & distribution of 4K UHD content; no longer unique to residential solutions WyreStorm presentation switchers are fully compliant with HDCP 2.2, enabling you to de-centralize source devices within an installation.

WyreStorm SW-130-TX-UK Key Features

  • Professional HDBaseT switcher/transmitter for video conference or meeting rooms
  • 3-switchable inputs — 2 HDMI and USB-C supporting
  • Content up to 4K/30 4:4:4 & RGB or 4K/60 4:2:0 8-bit
  • The latest HDR standards, including HDR-10 and Dolby Vision™ at 30Hz
  • HDCP 2.2 encryption technology ensuring compatibility with the latest 4K UHD content and sources
  • HD Multichannel audio up to DTS:X and Dolby Atmos™
  • USB-C port supports alt-mode functionality for A/V and USB data
  • USB-C charging for connected devices up to 2A
  • Compatible with DVI-I and DP++ v1.3 signals from supported devices
  • Additional 2ch analogue audio input for sending separate stereo audio to RX
  • USB2.0 host port for connection of far-end devices such as webcams, smart touchscreens and microphones
  • Automatic or manual CEC triggering for compatible connected screens or projectors
  • Primary power supply via PoH from a supported receiving device (RX-700)
  • Additional power input via DC port on rear via 12v 1A PSU (not included). Port shared with RS-232 input
  • Control options include automatic switching, manual switching & CEC trigger and RS-232 control
  • Compatible with TS-280 touchscreen for control with 12v power outlet
  • White 2-gang decora fascia, removable
HDMI Transmitter
100 Metre Range
USB Data Transmission
48V PoE (Power over Ethernet) Receiver

WyreStorm SW-130-TX-UK Specifications

Connectivity

Inputs 2 × HDMI In: 19-pin type A
1 × USB-C In: USB 3.1c Audio/Video (4.5Gbps)
1 × Audio In: 3.5mm (1/8in) TRS Stereo
USB Host: 1 × Type B host, Maximum data throughput: 190Mbps
Outputs 1 × HDBaseT out: 8-pin RJ45

Resolution and Ma× Cable Length

Video Resolutions Distance
HDMI
1920 × 1080p @60Hz 15m
2560 × 1440p @60Hz 15m
3840 × 2160p @30hz 8bit 4:4:4 7m
3840 × 2160p @30hz 10bit 4:2:0 HDR 5m
3840 × 2160p @30hz 12bit 4:2:2 HDR 5m
HDBaseT Cat6 Cat6a/7
1920 × 1080p @60Hz 70m 100m
2560 × 1440p @60Hz 100m 100m
3840 × 2160p @30hz 8bit 4:4:4 70m 100m
3840 × 2160p @30hz 10bit 4:2:0 HDR 70m 100m
3840 × 2160p @30hz 12bit 4:2:2 HDR 70m 100m

Processing

Transmission Encoding HDBaseT Class C, PAM16 Encoding
End To End Latency 10µs
Maximum Transmission Bit Rate 10.2Gbps
HDMI (v2.0b) TMDS, 340MHz Maximum
Audio 2ch audio over HDBaseT, 1-way to RX
Audio Formats 2ch PCM, Multichannel up to DTS-X and Dolby Atmos
Maximum Sampling Rate 192KHz
Maximum Audio Channels 32
Audio Return Channel (arc) Not Supported

Communication and Control

USB 3.1c Alt-mode Supported, A/V and USB data from RX
RS-232 1x RS-232: 4-pin Phoenix, Shared with 12v DC input
Compatible with WyreStorm TS-280 touchscreen via 4-pin phoenix port (only when using PoH)
HDCP Pass-Through, 2.3 Supported
EDID Pass-Through, from RX
Consumer Electronics Control (cec) One-way display trigger to RX
Auto Low Latency Mode (allm) Supported
Variable Refresh Rate (vrr) Supported

Mechanical

Power Supply 12V DC 1A (not included)
Max Power Consumption 7.8W
Power-over-HDBaseT (poh) Supported, 1-way from RX
Local Power Supply Input 4-pin Phoenix

Environmental

Operating Temperature 0 to + 45°C (32 to + 113 °F), 10% to 90%, non-condensing
Storage Temperature -20 to +70°C (-4 to + 158 °F), 10% to 90%, non-condensing
Maximum Btu 2.29 BTU/hr

Dimensions & Weight (Connector Housing)

Installation In-wall, 2-gang
Height 86mm/3.38in
Width 146mm/5.74in
Depth 38mm/1.55in
Weight 0.27kg/0.60lbs
In The Box 1 × SW-220-TX-W Transmitter
1 × 12V DC Power Supply (US/UK/EU/AU)
1 × 5-pin Terminal Block2x Mounting Brackets with Screws
1 × Quickstart Guide

Regulatory

Safety And Emission CE, FCC, RoHS, RCM, EAC