Extron MVX 44 VGA A (60-635-21)

4×4 VGA Matrix switcher with stereo audio

For pricing and configuration options please call or email us.

The MVX 44 VGA A is a 4x4 VGA matrix switcher with stereo audio, designed for applications that route high resolution computer-video and stereo audio signals. Convenient 15-pin HD connectors are used for all computer-video input and output connections.

In addition, the MVX 44 VGA A comes standard with the QuickSwitch Front Panel Controller (QS-FPC), which allows for touch-of-a-button input and output selection directly from the front panel. It can also be controlled through the optional IR 501 remote control.

Extron MVX 44 VGA A Key Features

Inputs: VGA on female 15-pin HD connectors; audio on 3.5 mm stereo mini jacks
Outputs: Video on female 15-pin HD connectors; audio on captive screw connectors
Ultra-wideband performance - 350 MHz to 500 MHz (-3 dB), depending on model - MVX Series models in I/O sizes from 4x4 to 12x8 provide a minimum of 350 MHz (-3 dB) RGB video bandwidth, fully loaded. Larger sizes, from 12x12 to 16x16, provide a minimum of 500 MHz (-3 dB) at full performance capability, when one input drives all outputs.
Triple Action Switchingâ„¢ for RGB delay - RGB delay blanks the screen when the matrix switcher switches to a new source. The new sync signals precede the RGB signals, so there is no glitch during the transition.
Switches both balanced and unbalanced stereo audio - Output on captive screw connectors.
Audio input gain and attenuation - Allows users to set the level of gain or attenuation for each audio input channel, eliminating noticeable volume differences when switching between sources.
Switchable audio output levels - Output levels can be switched between +4 dBu professional and -10 dBV consumer levels, allowing a mix of professional and consumer-level audio equipment.
Optional IR 501 handheld remote control
Audio breakaway - Provides the capability to break an audio signal away from its corresponding video signal, allowing the audio and video signals from one source to be switched to different destinations.
View I/O mode - Easily view which inputs and outputs are actively connected.
QS-FPCâ„¢ - QuickSwitch Front Panel Controller - Provides a discrete button for each input and output, allowing for simple, intuitive operation.
Global presets - Frequently-used I/O configurations may be saved and recalled from the front panel or via serial control. This time-saving feature allows you to set up I/O configurations and store them in memory for future use.
Front panel security lockout - Prevents unauthorized use when the matrix switcher is installed in an unsecured environment where easy access is not desirable. In lock-out mode, a special button combination is required to operate the front panel.
RS-232 control port - Using RS-232 serial commands, the MVX Series can be controlled and configured via the Extron WindowsÂ®-based control program, or integrated into a control system. Extron products use the SIS - Simple Instruction Set command protocol, a set of basic ASCII code commands that allow for quick and easy programming. The serial port also makes it easy to install firmware updates.
Control software - Provides a graphical, drag-and-drop interface for I/O configuration and other customization functions via RS-232 remote control. This software also offers an emulation mode for configuration of an offsite matrix switcher; the I/O configuration may be saved for future downloading to the matrix switcher.
Optional control panels and keypads - Optional X/Y control panels, bus control panels, and keypads provide the flexibility to control an MVX Series matrix switcher from a remote location.
1U, rack-mountable metal enclosure
Internal Extron Everlastâ„¢ power supply - Provides worldwide power compatibility, with highâ€‘demonstrated reliability and low power consumption for reduced operating cost
Extron Everlast Power Supply is covered by a 7â€‘year parts and labor warranty