sales@ivojo.co.uk
01348 840080
Extron DTP T DP 4K 230 (60-1076-12)
1:1 DisplayPort Twisted Pair Transmitter
Max. 70m @ 2560×1600, HDBaseT Compatible
The Extron DTP T DP 230 is a transmitter for sending DisplayPort, audio, and bidirectional RS-232 and IR signals up to 230 feet (70 meters) over a shielded CATx cable to Extron DTP-enabled products. It provides an economical and effective means of incorporating higher resolution DisplayPort signals with embedded audio into DTP Systems. In addition, the DTP T DP 230 accepts analog stereo audio signals for simultaneous transmission over the same shielded twisted pair cable. It supports computer video up to 2560x1600, 1080p/60 Deep Color, and 4K resolutions. The compact enclosure size and remote power capability make the DTP T DP 230 ideal for discreet placement in lecterns, beneath tables, or wherever needed to meet application requirements.
The HDCP-compliant DTP T DP 230 enables the reliable transmission of DisplayPort signals. In addition, DDC communication of EDID and HDCP is continuously maintained between a source and display, ensuring direct compatibility and optimal signal transmission between devices. The DTP T DP 230 also provides a connection for sending stereo analog audio to a DTP-enabled matrix switcher, switcher, or signal processor. The analog stereo audio signal is sent over the same shielded twisted pair cable as the DisplayPort and control signals, eliminating the need for a separate cable run to support analog audio at the DTP-enabled product.
The twisted pair transmitter provides other convenient, integrator-friendly features designed to help simplify installation. The DTP T DP 230 supports simultaneous transmission of bidirectional RS-232 and IR signals from a control system for AV device control. Also, the transmitter can be remotely powered over the shielded twisted pair cable by a DTP-enabled product, allowing both devices to share one power supply.
The DTP T DP 230 can be integrated with an Extron DTP CrossPoint® 84 Presentation Matrix Switcher, or other DTP-enabled products to support sources at remote locations. The transmitter is housed in a 1" (2.5 cm) high, quarter rack width metal enclosure. The low profile design of the DTP T DP 230 allows for discreet placement in lecterns and beneath tables.
The DTP output can be configured for compatibility with HDBaseT-enabled displays to send digital video and embedded audio, plus bidirectional RS-232 and IR signals up to 230 feet (70 meters) over a shielded CATx cable.
Extron recommends Extron-certified XTP DTP 24 shielded twisted pair cable, shielded RJ-45 plugs, jacks, and couplers engineered for optimum signal transmission with Extron DTP Series products. The XTP DTP 24 cable is certified to 475 MHz, and utilizes a SF/UTP design with four unshielded 24 AWG twisted pair conductors inside an overall braid and foil shield for superior performance and noise immunity.
Extron DTP T DP 4K 230 Key Features
- Transmits DisplayPort plus control and analog audio up to 230 feet (70 meters) over a shielded CATx cable - The DTP T DP 230 provides high reliability and maximum performance on an economical and easily installed cable infrastructure.
- Inputs: One DisplayPort, one 3.5 mm stereo mini jack for audio
- Output: One DTP 230 twisted pair output on RJ-45
- Supports computer video up to 2560x1600, HDTV 1080p/60 Deep Color, and 4K resolutions
- Compatible with CATx shielded twisted pair cable - Shielded twisted pair cabling with solid center conductor sizes of 24 AWG or better is recommended for optimal performance.
- Extron XTP DTP 24 shielded twisted pair cable is strongly recommended for optimal performance
- DTP output is compatible with HDBaseT-enabled devices - The DTP output can be configured to send video and embedded audio, plus bidirectional RS-232 and IR signals to an HDBaseT-enabled display.
- Accepts additional analog stereo audio signals - The DTP T DP 230 accepts stereo analog audio signals for simultaneous transmission over the same shielded twisted pair cable. Analog audio is not embedded onto the digital video signal.
- Supports multiple embedded audio formats - The DTP T DP 230 is compatible with a broad range of multi-channel audio signals, providing reliable operation with DisplayPort sources.
- Bidirectional RS-232 and IR pass-through for AV device control - Bidirectional RS-232 control and IR signals can be transmitted alongside the video signal, allowing remote AV devices to be controlled without the need for additional cabling.
- Remote power capability - For simplified installation, the transmitter can be remotely powered by a DTP-enabled product over the twisted pair connection.
- HDCP compliant
- Supports EDID and HDCP transmission - DDC channels are actively buffered, allowing continuous communication between source and display.
- Supports DisplayPort data rates up to 10.8 Gbps
- LED indicator for signal presence and power - Provides visual indication of system status for real-time feedback and monitoring of key performance parameters.
- RJ-45 signal and link LED indicators for DTP port - Provides a means for validating signal flow and operation, allowing quick identification of connectivity issues.
- Compatible with all DTP 230 Series receivers and DTP-enabled products - Enables mixing and matching with desktop and wallplate receivers, as well as other DTP-enabled products to meet application requirements.
- 1" (2.5 cm) high, quarter rack width metal enclosure - With a low profile enclosure, the device can be installed discreetly wherever needed.
- Highly reliable, energy-efficient external universal power supply included, replacement part #70-775-01 - Provides worldwide power compatibility, with high demonstrated reliability and low power consumption for reduced operating costs.