Quality Construction - Each coax has a 28 gauge solid center conductor and dual shield design consisting of copper braid and mylar/foil. Coax jackets are color-coded red, green, blue, yellow, black. Rugged and flexible jacket with internal rip cord and sequential markings every meter.
Universal Compatibility - Compatible with Kramer's compression connectors as well as typical crimp systems.
Varied Selection of Lengths - Available in 100 and 300 meter reels (330 and 990ft.).
Cat 6A - 4 shielded twisted pairs (U/FTP) of 23AWG solid copper conductors are cabled together in an unshielded outer jacket
Ideal for LAN and 4K HDBaseT applications
Optimized for Kramer Hardware - Use with any of Kramer's wide range of twisted pair digital transmitter-receiver sets. Terminate with shielded transmitter-receiver sets (DGKat and HDBaseT) and shielded RJ-45 connectors
HTBaseT Alliance Recommended
RJ-45 Connector - The larger diameter 23AWG twisted pair cable requires a special RJ-45 connector. Use the K-LAN CON-RJ45-3
Length - Available in wooden drums of 305/500m (1000/1640ft) and pre-terminated lengths up to 60m
UTP designed for Kramer analogue twisted pair transmitters and receivers.
BC-XTP resembles typical CAT 5e, but with internal components optimized for transmission of video/audio signals rather than high-speed data.
Quality Construction - Durable and flexible bulk cable. Four pairs of 24 gauge solid copper.
Optimized for High-res Video/Audio Signals - Four pairs are twisted at the same ratio so the actual length of each is identical. Video shift or "skew" is eliminated in long runs because the RGB color signals arrive at the same time. Note that BC-XTP is not suited for high-speed data or network applications.
Optimized for Kramer Hardware - Use with any of Kramer's wide range of twisted pair transmitter-receiver sets such as PT-110/PT-120, WP-110/PT-120, etc. Terminate with RJ-45 connectors, or strip and attach to terminal strips or punchdown blocks as needed.
Length - Available in pull boxes of 100/300m (328/985ft).